Palisade gas fireplace by Sierra Flame

The Palisade 36

The Palisade 36

Category:

Product Description

Print Friendly, PDF & Email

The Palisade 36 Direct Vent Linear Gas Fireplace

 
The Palisade see-thru direct vent fireplace is a perfect choice for today’s contemporary floor plans, allowing you a great view of your fireplace from more than one room.  Not only is the Palisade smart but sexy as well with it’s curved front face design.

This compact gas fireplace is only 10 7/8” deep but offers an impressive glass viewing area so you can enjoy even more flame.

The Palisade is available in Standard and Deluxe systems. Each fireplace comes with contemporary black porcelain panels, black reflective glass and 3 piece rock set. This fireplace also comes standard to run on natural gas but also available for liquid propane use. Safety barrier recommended.

 

FEATURES

Standard System

  • Clean face design
  • 2 safety barriers included 2
  • Tempered glass
  • 100% safety shutoff 1
  • Top vent only
  • Electronic ignition
  • Black glass and 3 pce rock set
  • Basic remote control

Deluxe System

  • Clean face design
  • 2 safety barriers included
  • Tempered glass
  • 100% safety shutoff
  • Top vent only
  • Electronic ignition
  • Black glass and 3 pce rock set
  • Deluxe remote control
  • Fan kit • Modulating valve

Optional – 6 Piece Design Media Kit

Deluxe 6 piece log set with designer decorative media including black fire glass, 90 piece pebbles, rocks, embers.

6 piece decorative media kit

 

Included Accessories

Optional Accessories

  • Termination kit
  • Extra decorative rock media – 3 piece set

Surround Options

  • Black surround (without access panel) ‐ 41‐1/2″ W X 25‐3/4″ H
  • Black surround with access panel ‐ 41‐1/2″ W X 25‐3/4″ H
  • Stainless surround (without access panel) ‐ 41‐1/2″ W X 25‐3/4″ H
  • Stainless surround with access panel ‐ 41‐1/2″ W X 25‐3/4″ H

Fuel Options

  • Natural Gas 
  • Liquid Propane

Glass Viewing Area:

15” H x 32-1/2” W

Installation Support Center

View technical specification drawings, preview or download the most current manuals, brochures and repair guides.

book ruler screwdriver brochure Frequently asked questions email
Manual Specifications Repair Guide Brochures  FAQ’s  Technical Support

Warning WARNING:

This product can expose you to chemicals including Carbon Monoxide, that is an externally vented by-product of fuel combustion, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

More on California Proposition 65 – CLICK HERE



DISCLAIMER

Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.


We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.



DISCLAIMER

Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.


We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.

Specs

Gas Specifications

Framing Dimensions Viewing Area BTUs (NG) AFUE / P.4
(NG Efficiency)
Weight*
Hi Low
32” H x 39-1/2” W x 10-7/8” D
15” H x 32-1/2” W
20,000
13,000
63.45%
105 lbs.

 

Venting**
Ceiling /
Mantle Height
4” flex vent on exhaust side
7” flex vent on the air intake side
Internal ceiling = minimum 40”
Mantle Height = minimum 40””

**Venting – Any certified 2 ply flex piping can be used. Certified on Duravent, Selkirk, Metal Fab, ICC


 



DISCLAIMER

Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.


We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.

Installation



DISCLAIMER

Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.


We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.

Surround Dimensions

Outside Surround Dimensions –  Palisade

Surround Dimensions Diagrams

Model number Outside Surround Dimensions (H x W) Description
PALI SADE-36-SURR 26.56 x 42.87 Black surround (without access panel)
PALI SADE-36-SURR-AP 26.56 x 42.87 Black surround with access panel


DISCLAIMER

Flames and flame colors on the website may appear differently in real life. To view the most accurate representation of the FIRE & ICE® flame and our regular flame sets, please visit your nearest dealer.


We reserve the right to update products, specifications and dimensions are subject to change. Please refer to the product manual to verify measurements and clearance requirements. All local building codes must be followed.